- You do not have any products in your shopping cart yet.
Acrylic starter set - starter set
.jpg)
Acrylic starter set - starter set
With the classic acrylic starter set, you can create natural nail extensions. If you like, you can also enhance the set with nail tips and tip glue to also model artificial nails.
Contents:- 1x acrylic powder clear 30g
- 1x Acrylic Liquid Liquid 100ml
- 1x acrylic paint brush
- 1x Dappen Dish Glass
- 1x curved professional file (100/180 grit)
- 3x professional files straight (grain 100/180)
- 1x buffer white
- 1x high gloss polishing block
- 1x Cleaner 100ml
- 1x Rosewood Stick
- 1x cell roll with 250 cells
- 1x step-by-step instructions
The acrylic powder is mixed together with the acrylic liquid and then applied to the nail using a brush according to the enclosed instructions. After application, the nails are air-dried. The drying time depends on the ambient temperature and may therefore vary. A special light-curing device is not required. Acrylic nails are known for their high durability and strength. Our acrylic powders give the nails a natural and beautiful appearance. For colorful highlights such as French nails and nail designs, we offer acrylic colored powders in a variety of sensational colors.
acrylic liquid
For every acrylic powder modeling, acrylic liquid is needed to achieve a great result.
acrylic brush
The acrylic brush is needed to mix and shape the liquid with the powder.
Dappen dish glass
To simplify the mixing and stirring of gels, acrylic powder, and liquids, the Dappen Dish Glass is the ideal accessory. When performing an acrylic modeling, it is always necessary to use the Dappen Dish Glass for preparing the acrylic mixture. It is also excellent for all types of liquids such as brush cleaner or disinfectant.
Banana file
Our nail file is best suited for oval or rounded shaped nails due to its curved form. Additionally, it allows for easier work when building up the individual layers on the upper area of the nail and simplifies the avoidance of the cuticle. With this nail file, you will achieve effective and professional results.
Nail file straight/narrow
Specifically designed for use in professional nail modeling, this file is suitable for both fine and coarse finishing work. It is ideal for trimming, shaping, removing ridges, and lifting. The file can be easily cleaned with conventional disinfectants.
buffer
The file block has four sides and a uniform grit. It is ideal for roughing up the natural nails and performing fine filing work after shaping to correct minor imperfections. The buffer can be easily disinfected with commercially available disinfectants.
High gloss polishing block
The high-gloss polishing block is ideal for quickly eliminating small and medium imperfections. After applying acrylic or gel to nails, this polishing block provides a radiant shine.
Before you start, remove any nail polish with nail polish remover. The hands to be treated must then be thoroughly cleaned. Now the hands should be disinfected. Commercial hand disinfectants can be used for this. Cleanliness is the top priority for nail modeling.
1. First, use the cuticle tool to gently remove the cuticles. Then use the rosewood stick to gently push back the cuticles so you can continue working on the nail. For protruding cuticles you can use e.g. a cuticle nipper.
2. Now file the natural nail into shape and then gently matt the nail with the sanding block. This removes the layer of fat. Be careful not to over file the nail. The nail should no longer shine. Pay particular attention to this with new sanding blocks or files!
3. Now apply the primer to the natural nail area and allow the primer to air dry for about 30 seconds.
4. Now prepare the Dappen Dish glass by filling it with the liquid.
Caution! The liquid must always be clear, otherwise the nails can become cloudy.
5. Now dip your brush into the Dappen Dish glass and then wipe it off lightly. Dip the brush into the acrylic powder until a small ball forms at the tip of the brush. If the bead is shiny, it's ready for processing. Distribute it carefully on the nail surface and do not work into the nail edges, otherwise the acrylic can lift faster. Repeat the process (usually 3-5 times) until you have finished the entire nail. Then let it harden for a few minutes.
6. Now you're almost there. Use a file to even out minor bumps and file everything into shape. Then polish the modeling with the polishing block, starting with the coarsest side and then getting finer and finer.
7. You are basically done now. However, it is recommended to apply a protective layer to extend the durability. Well suited for this is, for example, our sun blocker (yellow protection) or our top coat. Before applying, make sure that the nails are free of filing dust.
8. Finally, it is advisable to take some nail oil. Distribute it on the cuticles and massage it in slowly. If desired, put some hand cream on your hands or those of the customer to make everything soft and smooth. This is how you round off the nail modeling and have a wonderful overall result!
Please clean your work equipment thoroughly afterwards. This is especially true for the brush. Otherwise, this can no longer be used for the next modelling.
1. First, use the cuticle tool to gently remove the cuticles. Then use the rosewood stick to gently push back the cuticles so you can continue working on the nail. For protruding cuticles you can use e.g. a cuticle nipper.
2. Now file the natural nail into shape and then gently matt the nail with the sanding block. This removes the layer of fat. Be careful not to over file the nail. The nail should no longer shine. Pay particular attention to this with new sanding blocks or files!
3. Now apply the primer to the natural nail area and allow the primer to air dry for about 30 seconds.
4. Now prepare the Dappen Dish glass by filling it with the liquid.
Caution! The liquid must always be clear, otherwise the nails can become cloudy.
5. Now dip your brush into the Dappen Dish glass and then wipe it off lightly. Dip the brush into the acrylic powder until a small ball forms at the tip of the brush. If the bead is shiny, it's ready for processing. Distribute it carefully on the nail surface and do not work into the nail edges, otherwise the acrylic can lift faster. Repeat the process (usually 3-5 times) until you have finished the entire nail. Then let it harden for a few minutes.
6. Now you're almost there. Use a file to even out minor bumps and file everything into shape. Then polish the modeling with the polishing block, starting with the coarsest side and then getting finer and finer.
7. You are basically done now. However, it is recommended to apply a protective layer to extend the durability. Well suited for this is, for example, our sun blocker (yellow protection) or our top coat. Before applying, make sure that the nails are free of filing dust.
8. Finally, it is advisable to take some nail oil. Distribute it on the cuticles and massage it in slowly. If desired, put some hand cream on your hands or those of the customer to make everything soft and smooth. This is how you round off the nail modeling and have a wonderful overall result!
Please clean your work equipment thoroughly afterwards. This is especially true for the brush. Otherwise, this can no longer be used for the next modelling.
Acryl Powder Clear
Polyethylmethacrylate, Polymethyl Methacrylate, Benzoyl peroxide, [+- Silica, CI77891, CI15850,CI73360, CI77491, CI77007]
Acryl Liquid
Ethyl metahcrylate, Triethyleneglycol dimetacrylate, Dimethyltolylamine, Hema, P-hydroxyanisole, Hydroquinone, Violet 2/CI 60725, Blue 1/CI 42090
Cleaner
Isopropropyl Alkohol,Aqua.
Warnings:
Keep out of the reach of children! In case of contact with eyes, rinse thoroughly with water and consult a doctor. If skin reddens or allergic reactions occur, stop contact with the product and consult a doctor if necessary. Avoid skin contact. Can cause allergies. Please read the application instructions carefully! Use: For application to artificial fingernails. For commercial use only!
Polyethylmethacrylate, Polymethyl Methacrylate, Benzoyl peroxide, [+- Silica, CI77891, CI15850,CI73360, CI77491, CI77007]
Acryl Liquid
Ethyl metahcrylate, Triethyleneglycol dimetacrylate, Dimethyltolylamine, Hema, P-hydroxyanisole, Hydroquinone, Violet 2/CI 60725, Blue 1/CI 42090
Cleaner
Isopropropyl Alkohol,Aqua.
Warnings:
Keep out of the reach of children! In case of contact with eyes, rinse thoroughly with water and consult a doctor. If skin reddens or allergic reactions occur, stop contact with the product and consult a doctor if necessary. Avoid skin contact. Can cause allergies. Please read the application instructions carefully! Use: For application to artificial fingernails. For commercial use only!
