- You do not have any products in your shopping cart yet.
UV/LED Nail Set 6 with UV/LED builder gel Frozen incl. UV/LED lamp
.jpg)
UV/LED Nail Set 6 with UV/LED builder gel Frozen incl. UV/LED lamp
Extensive set with various UV/LED gels and varnishes in practical brush bottles for easy application.Contents:
- 1x UV / LED combination device (model and color may vary)
- 1x build-up gel Frozen 10 ml
- 3x UV / LED Gellack a´6ml (random principle, no color choice possible)
- 1 x UV/LED Quick Finish 6ml
- 1x Primer 10ml
- 1 x Cleaner 100ml
- 1 x step-by-step instructions
Intelligent dual LED lamp based on the new generation of dual LED / UV LEDs. Cures all types of gels and hybrid varnishes with UV and LED photoinitiators. Equipped with a photocell and timer with three levels. Removable base plate, therefore also suitable for foot modelling.
Builder gel Frozen
- Medium viscosity LED/UV gel
- self smoothing
- semi-transparent with color nuances
- medium heat development
- Curing time: 60 seconds under a UV/LED combination device - 120 seconds under a UV device
- very good adhesion and high stability
- Removable with acetone
Adhesion promoter for nail design UV gel and acrylic systems. The primer ensures 100% hold even with problem nails. Primer should only be applied thinly to the natural nail. The primer strengthens the adhesion between the UV gel and the natural nail. Do not get on the cuticles with the primer!
Base & Top Vanish
The high-quality sealing gel comes in a practical brush bottle and is perfect for sealing nail models. It gives the nail a natural shine and protects against chipping and scratching.
- Does not develop a sweat layer
- For all acrylic and gel systems
- Thin viscous consistency
Nail polish based on UV gel. It is easy to use in the practical brush bottle. It is scratch-resistant, chip-free and extremely durable than conventional nail polish. UV nail polish is equally suitable for natural nails and nail modeling.
This is a highly pigmented nail polish that needs to be applied very thinly to fully cure! If the color lifts off easily, it has been applied too thickly.
Curing time for all gels and varnishes
UV light curing device: 120 seconds
LED / UV combination device : 60 seconds
Cleaner / degreaser
The nail cleaner has an antibacterial effect and is well tolerated by the natural nail.
- Cleaner contains isopropanol
- Suitable for removing gel residues
- Degreases and disinfects the natural nail
- Removes the dispersion film after curing
- For cleaning brushes and tools
Before you start with your first nail modelling, you should set up your workplace so that you have all the utensils to hand. Provide sufficient lighting at your workplace, possibly with an additional work lamp. UV light curing device, UV gels, files, buffers, cells, tip box, tip glue, cutter, brush, cleaner, dust brush, nail oil and possibly all nail art products such as stamp sets, glitter powder, rhinestones, etc. should be ready.
- Wash hands thoroughly and dry well before starting. Remove nails from nail polish if necessary.
- Gently push back cuticles with a suitable cuticle pusher
- Shape fingernails with a file
- Roughen the natural nail carefully with a file or with a buffer until the nail is no longer shiny. Remove all dust from the nail with a nail brush or dusting brush. Please note that you should no longer touch the roughened nail with your bare fingers.
- The next step is to use the primer. Please apply the primer sparingly to the natural nail and allow it to dry briefly. Please make sure that the primer does not get on the cuticles.
- Now the base gel is applied thinly. Please make sure that nothing runs into the edge of the nail. Now cure under the LED/UC device for 60 seconds. After hardening, a sticky layer is formed, please do not remove it.
- The LED/UV gel in the brush bottle is now applied to the nail on the sticky layer. Again, please make sure that nothing runs into the edge of the nail. If gel has run into the edge of the nail, carefully remove the gel with a rosewood stick. For beginners, it makes sense to only apply gel to one finger at a time. Then briefly cure in the UV/LED light curing device and then repeat finger by finger. When all fingers are done, please fully cure for 1 minute. Now repeat the second hand step by step. Important: Do not remove the sweat layer.
- If you have bumps on the nail, then repeat the process again. Then remove the sweat layer with the cleaner and carefully file the nail surface into shape with a buffer. Remove the dust with a nail brush.
- After hardening or filing into shape, you can now apply a thin layer of LED/UV nail polish and also harden it in the LED/UV device for 60 seconds. Please repeat the process so that the color covers evenly. Please make sure that nothing runs into the edge of the nail. Again, you don't need to remove the sticky layer.
- Now apply the Quick Finish to the last layer. Apply the Quick Finish thinly from the edge of the nail bed to the tip of the nail. Please make sure that nothing runs into the edge of the nail. Here, too, it is advisable for beginners to work finger by finger individually. Then completely harden all fingers for 1 minute.
- There is no sweat layer here either.
- Now check the nails on the sides for gel residues and file them away carefully if necessary.
- Clean the nails completely with a little cleaner.