- You do not have any products in your shopping cart yet.
UV/LED Nail Set 2 with transparent UV/LED builder gel and UV/varnish in a brush bottle including UV/LED lamp
Gel nails made easy. This set contains various LED/UV gels and LED/UV lacquers in brush bottles. So the gel can be easily applied and processed. With the high-quality UV/LED combination device, you can cure the LED/UV gels and UV/LED lacquers. The LED/UV gels and the device are also perfect for foot modelling. A small manual is also included in the set.
Contents:
UV/LED Nail Set 1 with UV/LED gels in a brush bottle incl. UV/LED lamp
1x UV LED lamp 54 W model SunX for gel, gel polish with sensor and timer
1x LED/UV 10 ml Buildergel transparent in the brush bottle
3x UV/LED gel polish, 6ml each, 1x white and 2 pieces may vary
1x Base Gel 6ml
1x Quick Finish 6ml
1x Primer 10ml
1x cleaner 100ml
1x step-by-step instructions
Individual description:
UV LED lamp 54 W model SunX for gel, gel polish with sensor and timer, light curing device for nail design
This UV-LED dual device hardens UV and LED gel, as well as UV - LED varnish, hybrid varnish and Shellac.
Inside the UV LED lamp there is a light barrier that is activated by sensors and thus switches the device on and off without pressing a button.
With the timer function, 10s, 30s and 60s can be set. In continuous operation, the device switches off after 99s.
With the double power function, the strength can be set to 54W or 27W.
Very easy to use.
With a large LED screen to display the curing time.
The power of the 99s (Low Heat Mode) increases gradually over time so that the gel is cured gently.
Also suitable for foot modelling, as the base plate is removable.
Application:
Intelligent dual LED lamp up to 54 W power based on new generation dual LED / UV.LEDs.
The patented dual-LED technology emits light with wavelengths of 365 nm and 405 nm.
The lamp can cure all types of gel and hybrid varnish of UV and LED technology.
Technical specifications:
Device dimensions: 228mmx207mmx109mm
Number of LEDs: 35 pieces double LEDs (2in1)
Light band: 365nm, 405nm
Maximum power consumption: 54W (max)
Power supply parameters: Rated input: 100-240V, 50-60Hz
Built-in Timer:10s,30s,60s,99s
The statutory 2-year warranty applies
10 ml builder gel transparent in the brush bottle Champion Line
Champion Line - Transparent building gel in the practical brush bottle.
High-quality LED/UV gels that are available from Sun Garden Nails in various colored nuances. The easy-to-use gels are equally suitable for professionals and beginners.
Area of application:
natural nail reinforcement
Can be used as a builder
For nail modeling with nail tips
Short extension of the natural nail with template
Characteristics:
Medium viscosity LED/UV gel
self smoothing
medium heat development
Curing time: 60 seconds under a UV/LED combination device - 120 seconds under a UV device
very good adhesion and high stability
Removable with acetone
primers
The primer is an adhesion promoter for nail design LED/UV gel and acrylic systems. The primer ensures 100% hold even with problem nails. Primer applied thinly to the natural nail. The primer strengthens the adhesion between the UV gel and the natural nail. The primer should not get on the cuticles.
base gel
The thin viscous base gel from Sun Garden Nails is a high-quality base gel/adhesive gel. This LED/UV gel from the practical brush bottle can be used even if the gel nails have extreme adhesion problems. The base gel hardens completely under the LED/UV combination device in 60 seconds.
UV/LED Quick Finish Gel 6ml
The Sun Garden Nail Quick Finish Gel in the practical brush bottle is a high-quality top coat for sealing the nail modellage. This sealing gel hardens completely under the UV/LED combination device in 60 seconds and does not develop a sweat layer.
The Quick Finish gives the nail a natural shine and protects against chipping and scratches.
This nail top coat without a sweat layer is also ideal for incorporating pigments.
For acrylic and gel model
Perfect shine on the nails
Practical brush bottle for easy application to the nail
To protect the nail modeling against scratches
Thin viscous consistency
LED/UV Gel Polish, Hybrid Polish
LED/UV nail polish is an LED/UV gel based nail polish and comes in a handy brush bottle. The varnish is applied like a conventional nail varnish and then cured in the LED/UV combination device. It is hard-wearing, does not splinter and is significantly more durable than conventional nail polish.
Caution: This is a highly pigmented nail polish that needs to be applied very thinly to fully cure! If the color lifts off easily, it has been applied too thickly.
cleaner
The nail cleaner has an antibacterial effect and is well tolerated by the natural nail.
Cleaner contains isopropanol
Suitable for removing gel residues
Degreases and disinfects the natural nail
Removes the dispersion film after curing
For cleaning brushes and tools
Put some liquid on the cellette. In order to achieve the best possible dosage and to work sparingly, we recommend using one of our pump bottles.
UV LED lamp 54 W model SunX for gel, gel polish with sensor and timer, light curing device for nail design
This UV-LED dual device hardens UV and LED gel, as well as UV - LED varnish, hybrid varnish and Shellac.
Inside the UV LED lamp there is a light barrier that is activated by sensors and thus switches the device on and off without pressing a button.
With the timer function, 10s, 30s and 60s can be set. In continuous operation, the device switches off after 99s.
With the double power function, the strength can be set to 54W or 27W.
Very easy to use.
With a large LED screen to display the curing time.
The power of the 99s (Low Heat Mode) increases gradually over time so that the gel is cured gently.
Also suitable for foot modelling, as the base plate is removable.
Application:
Intelligent dual LED lamp up to 54 W power based on new generation dual LED / UV.LEDs.
The patented dual-LED technology emits light with wavelengths of 365 nm and 405 nm.
The lamp can cure all types of gel and hybrid varnish of UV and LED technology.
Technical specifications:
Device dimensions: 228mmx207mmx109mm
Number of LEDs: 35 pieces double LEDs (2in1)
Light band: 365nm, 405nm
Maximum power consumption: 54W (max)
Power supply parameters: Rated input: 100-240V, 50-60Hz
Built-in Timer:10s,30s,60s,99s
The statutory 2-year warranty applies
10 ml builder gel transparent in the brush bottle Champion Line
Champion Line - Transparent building gel in the practical brush bottle.
High-quality LED/UV gels that are available from Sun Garden Nails in various colored nuances. The easy-to-use gels are equally suitable for professionals and beginners.
Area of application:
natural nail reinforcement
Can be used as a builder
For nail modeling with nail tips
Short extension of the natural nail with template
Characteristics:
Medium viscosity LED/UV gel
self smoothing
medium heat development
Curing time: 60 seconds under a UV/LED combination device - 120 seconds under a UV device
very good adhesion and high stability
Removable with acetone
primers
The primer is an adhesion promoter for nail design LED/UV gel and acrylic systems. The primer ensures 100% hold even with problem nails. Primer applied thinly to the natural nail. The primer strengthens the adhesion between the UV gel and the natural nail. The primer should not get on the cuticles.
base gel
The thin viscous base gel from Sun Garden Nails is a high-quality base gel/adhesive gel. This LED/UV gel from the practical brush bottle can be used even if the gel nails have extreme adhesion problems. The base gel hardens completely under the LED/UV combination device in 60 seconds.
UV/LED Quick Finish Gel 6ml
The Sun Garden Nail Quick Finish Gel in the practical brush bottle is a high-quality top coat for sealing the nail modellage. This sealing gel hardens completely under the UV/LED combination device in 60 seconds and does not develop a sweat layer.
The Quick Finish gives the nail a natural shine and protects against chipping and scratches.
This nail top coat without a sweat layer is also ideal for incorporating pigments.
For acrylic and gel model
Perfect shine on the nails
Practical brush bottle for easy application to the nail
To protect the nail modeling against scratches
Thin viscous consistency
LED/UV Gel Polish, Hybrid Polish
LED/UV nail polish is an LED/UV gel based nail polish and comes in a handy brush bottle. The varnish is applied like a conventional nail varnish and then cured in the LED/UV combination device. It is hard-wearing, does not splinter and is significantly more durable than conventional nail polish.
Caution: This is a highly pigmented nail polish that needs to be applied very thinly to fully cure! If the color lifts off easily, it has been applied too thickly.
cleaner
The nail cleaner has an antibacterial effect and is well tolerated by the natural nail.
Cleaner contains isopropanol
Suitable for removing gel residues
Degreases and disinfects the natural nail
Removes the dispersion film after curing
For cleaning brushes and tools
Put some liquid on the cellette. In order to achieve the best possible dosage and to work sparingly, we recommend using one of our pump bottles.
EN: Instructions for UV/LED Nail Set 1 - 6
1. Wash your hands thoroughly before you start and dry them well. Remove nails from nail polish if necessary.
2. Gently push back cuticles with a suitable cuticle pusher
3. Shape fingernails with a file
4. Carefully roughen the natural nail with a file or with a buffer until the nail is no longer shiny. Remove all dust from the nail with a nail brush or dusting brush. Please note that you should no longer touch the roughened nail with your bare fingers.
5. The next step is to use the primer. Please apply the primer sparingly to the natural nail and allow it to dry briefly. Please make sure that the primer does not get on the cuticles.
6. Now the base gel is applied thinly. Please make sure that nothing runs into the edge of the nail. Now cure under the LED/UC device for 60 seconds. After hardening, a sticky layer is formed, please do not remove it.
7. The LED/UV gel in the brush bottle is now applied to the sticky layer on the nail. Again, please make sure that nothing runs into the edge of the nail. If gel has run into the edge of the nail, carefully remove the gel with a rosewood stick. For beginners, it makes sense to only apply gel to one finger at a time. Then briefly cure in the UV/LED light curing device and then repeat finger by finger. When all fingers are done, please cure 1 minute completely. Now repeat the second hand step by step. Important: Do not remove the sweat layer.
8. If you have bumps on the nail, then repeat the process again. Then remove the sweat layer with the cleaner and carefully file the nail surface into shape with a buffer. Remove the dust with a nail brush.
9. After hardening or filing into shape, you can now apply a thin layer of LED/UV nail polish and also harden it in the LED/UV device for 60 seconds. Please repeat the process so that the color covers evenly. Please make sure that nothing runs into the edge of the nail. Again, you don't need to remove the sticky layer.
10. Now apply the Quick Finish to the last layer. Apply the Quick Finish thinly from the edge of the nail bed to the tip of the nail. Please make sure that nothing runs into the edge of the nail. Here, too, it is advisable for beginners to work finger by finger individually. Then completely harden all fingers for 1 minute.
11. There is no sweat layer here either.
12. Now check the nails on the sides for gel residues and file them away carefully if necessary.
13. Clean the nails completely with a little cleaner.
1. Wash your hands thoroughly before you start and dry them well. Remove nails from nail polish if necessary.
2. Gently push back cuticles with a suitable cuticle pusher
3. Shape fingernails with a file
4. Carefully roughen the natural nail with a file or with a buffer until the nail is no longer shiny. Remove all dust from the nail with a nail brush or dusting brush. Please note that you should no longer touch the roughened nail with your bare fingers.
5. The next step is to use the primer. Please apply the primer sparingly to the natural nail and allow it to dry briefly. Please make sure that the primer does not get on the cuticles.
6. Now the base gel is applied thinly. Please make sure that nothing runs into the edge of the nail. Now cure under the LED/UC device for 60 seconds. After hardening, a sticky layer is formed, please do not remove it.
7. The LED/UV gel in the brush bottle is now applied to the sticky layer on the nail. Again, please make sure that nothing runs into the edge of the nail. If gel has run into the edge of the nail, carefully remove the gel with a rosewood stick. For beginners, it makes sense to only apply gel to one finger at a time. Then briefly cure in the UV/LED light curing device and then repeat finger by finger. When all fingers are done, please cure 1 minute completely. Now repeat the second hand step by step. Important: Do not remove the sweat layer.
8. If you have bumps on the nail, then repeat the process again. Then remove the sweat layer with the cleaner and carefully file the nail surface into shape with a buffer. Remove the dust with a nail brush.
9. After hardening or filing into shape, you can now apply a thin layer of LED/UV nail polish and also harden it in the LED/UV device for 60 seconds. Please repeat the process so that the color covers evenly. Please make sure that nothing runs into the edge of the nail. Again, you don't need to remove the sticky layer.
10. Now apply the Quick Finish to the last layer. Apply the Quick Finish thinly from the edge of the nail bed to the tip of the nail. Please make sure that nothing runs into the edge of the nail. Here, too, it is advisable for beginners to work finger by finger individually. Then completely harden all fingers for 1 minute.
11. There is no sweat layer here either.
12. Now check the nails on the sides for gel residues and file them away carefully if necessary.
13. Clean the nails completely with a little cleaner.
f