- You do not have any products in your shopping cart yet.
Main page » Starter Sets » LED/UV gel starter set » Starterset Nail Texas - UV Gel Set - Nagelstudio Set - Beginner Set with Stamp Set - Nail Studio Starter Set

Starterset Nail Texas - UV Gel Set - Nagelstudio Set - Beginner Set with Stamp Set - Nail Studio Starter Set
Content:
1x UV-LED combi device Model and shape may vary - UV-LED combi device is equipped with a light barrier and has a three-stage timer. Picture is an example. Removable base plate, therefore also suitable for foot modelling.
1x UV 1-phase gel 30ml
3 x UV color gels à 5ml (from our range-random principle pictures are examples)
1x cleaner 100ml
1x buffer
3x file narrow grit 100x180
1x 3-piece brush set.
1x cellettes (6 pcs.)
1x primer
1x Nail Art Rondell (example, colors and shapes may vary)
1x nail art net (random principle, no selection possible)
1x stamping varnish white
1x stamping lacquer black
1x scraper and stamp
1x stamp template (shape and pattern vary)
1x step by step instructions
Content:
1x UV-LED combi device Model and shape may vary - UV-LED combi device is equipped with a light barrier and has a three-stage timer. Picture is an example. Removable base plate, therefore also suitable for foot modelling.
1x UV 1-phase gel 30ml
3 x UV color gels à 5ml (from our range-random principle pictures are examples)
1x cleaner 100ml
1x buffer
3x file narrow grit 100x180
1x 3-piece brush set.
1x cellettes (6 pcs.)
1x primer
1x Nail Art Rondell (example, colors and shapes may vary)
1x nail art net (random principle, no selection possible)
1x stamping varnish white
1x stamping lacquer black
1x scraper and stamp
1x stamp template (shape and pattern vary)
1x step by step instructions
UV-LED combi device
UV-LED combi device Model and shape may vary - UV-LED combi device is equipped with a light barrier and has a three-stage timer. Picture is an example. Removable base plate, therefore also suitable for foot modelling.
UV 1-phase gel (foundation gel, build-up gel and finish gel in one)
For a nail modeling, UV gel must be built up on the nail in several steps. This 1-phase gel clear is ideal for priming, the perfect build-up of a nail modeling and as a finishing gel for absolute high gloss. The 1-phase gel is applied thinly as a priming gel, then harden for 2 minutes in a UV light curing device. Due to its transparent, clear substance, the 1-phase gel is also used for the build-up. The UV 1-phase gel is a medium-viscous, clear UV gel that is easy to apply and does not run into the nail edge. This gives the fingernail its unmistakable stability and durability. The UV 1-phase gel has to harden in a UV light curing device for 2 minutes. The new recipe means that there is no heat on the fingernail. The UV 1-phase gel can then be easily filed into shape and colored and creative with our numerous UV color and effect gels. Depending on the customer's wishes and the creativity of a nail designer, beautiful motifs or patterns take their place on the nail. When using finished patterned nail tips, they can be coated with the clear UV gel and retain their beautiful appearance. Now apply the UV 1-phase gel clear thinly as the last layer and harden it again for 2 minutes. Then remove the sweat layer with cleaner and your fingernails get the absolute high gloss.
UV color gel
UV color gel is highly opaque and easy to apply. The curing time of UV color gel is 120 seconds. up to 140 sec Please stir the UV color gel before use. UV color gel should shine after curing, if this is not the case, you have either applied the UV color gel too thickly or cured it too short.
Cleaner / degreaser
Cleaner / degreaser to remove the fat layer. The sweat layer arises when the UV gels harden. The sweat layer is easily removed with cleaner / degreaser. Cleaner / degreaser creates a perfect shine after applying and curing the finish gels. The natural nail and the filed nail modeling can be cleaned with cleaner / degreaser.
Buffer
White buffer 4-sided filing block with equilateral grain. This buffer is suitable for roughening natural nails. The buffer is also used for fine filing after modeling with UV gels to remove small bumps. Buffer can be disinfected with commercially available disinfectants.
Nail file straight
Nail file white professional file 100/180 grit. The nail file narrow / straight is especially suitable for professional nail modeling. The nail file has a grain size of 100/180 so that fine and coarse filing work can be done easily. With this nail file, the fingernails can be shortened easily, the fingernails shaped, all bumps and lifts removed effortlessly. The nail file can be disinfected with commercially available disinfectants.
Brush set
With our brush set you get all the necessary gel brushes for nail modeling. These three variants are part of the basic equipment in a nail salon. The straight gel brushes can be used to apply the UV gels. With the slanted synthetic hair brush you can wonderfully and easily apply a smile line to the tip of the nail.
UV-LED combi device Model and shape may vary - UV-LED combi device is equipped with a light barrier and has a three-stage timer. Picture is an example. Removable base plate, therefore also suitable for foot modelling.
UV 1-phase gel (foundation gel, build-up gel and finish gel in one)
For a nail modeling, UV gel must be built up on the nail in several steps. This 1-phase gel clear is ideal for priming, the perfect build-up of a nail modeling and as a finishing gel for absolute high gloss. The 1-phase gel is applied thinly as a priming gel, then harden for 2 minutes in a UV light curing device. Due to its transparent, clear substance, the 1-phase gel is also used for the build-up. The UV 1-phase gel is a medium-viscous, clear UV gel that is easy to apply and does not run into the nail edge. This gives the fingernail its unmistakable stability and durability. The UV 1-phase gel has to harden in a UV light curing device for 2 minutes. The new recipe means that there is no heat on the fingernail. The UV 1-phase gel can then be easily filed into shape and colored and creative with our numerous UV color and effect gels. Depending on the customer's wishes and the creativity of a nail designer, beautiful motifs or patterns take their place on the nail. When using finished patterned nail tips, they can be coated with the clear UV gel and retain their beautiful appearance. Now apply the UV 1-phase gel clear thinly as the last layer and harden it again for 2 minutes. Then remove the sweat layer with cleaner and your fingernails get the absolute high gloss.
UV color gel
UV color gel is highly opaque and easy to apply. The curing time of UV color gel is 120 seconds. up to 140 sec Please stir the UV color gel before use. UV color gel should shine after curing, if this is not the case, you have either applied the UV color gel too thickly or cured it too short.
Cleaner / degreaser
Cleaner / degreaser to remove the fat layer. The sweat layer arises when the UV gels harden. The sweat layer is easily removed with cleaner / degreaser. Cleaner / degreaser creates a perfect shine after applying and curing the finish gels. The natural nail and the filed nail modeling can be cleaned with cleaner / degreaser.
Buffer
White buffer 4-sided filing block with equilateral grain. This buffer is suitable for roughening natural nails. The buffer is also used for fine filing after modeling with UV gels to remove small bumps. Buffer can be disinfected with commercially available disinfectants.
Nail file straight
Nail file white professional file 100/180 grit. The nail file narrow / straight is especially suitable for professional nail modeling. The nail file has a grain size of 100/180 so that fine and coarse filing work can be done easily. With this nail file, the fingernails can be shortened easily, the fingernails shaped, all bumps and lifts removed effortlessly. The nail file can be disinfected with commercially available disinfectants.
Brush set
With our brush set you get all the necessary gel brushes for nail modeling. These three variants are part of the basic equipment in a nail salon. The straight gel brushes can be used to apply the UV gels. With the slanted synthetic hair brush you can wonderfully and easily apply a smile line to the tip of the nail.
Before you start with your first nail modelling, you should set up your workplace so that you have all the utensils to hand. Provide sufficient lighting at your workplace, possibly with an additional work lamp. UV light curing device, UV gels, files, buffers, cells, tip box, tip glue, cutter, brush, cleaner, dust brush, nail oil and possibly all nail art products such as stamp sets, glitter powder, rhinestones, etc. should be ready.
Instructions for remodeling
Instructions for french nail tips
Apply a thin layer of your chosen French or color gel to the tip of the nail (it doesn't have to be opaque yet) and cure for 15-20 seconds. Now the second layer of French or color is applied, creating a beautiful white or colored French tip. Please do not remove the sweat layer but continue working from step 14.
natural nail reinforcement
If you don't want to lengthen your fingernails (without nail tips) but only strengthen them, then step 5-8 can be omitted. Proceed with all further steps as described.
Filling in the nail modelling
When filling in gel nails, first file the transition of the mature gel nail flat and remove any lift, then carefully file any color, french or pattern, then continue from step 9.
Hints
UV gels must always be cured in a UV light curing device. Between the different work steps, always make sure that the gel jars are not standing directly on the light-curing device, otherwise they will harden in the jar. Make sure that no sunlight shines into the rooms or onto the workplace. Furthermore, you should not work outdoors.
Instructions for remodeling
- Wash hands thoroughly and dry well before starting. Remove nails from nail polish if necessary.
- Use a spatula or rosewood stick (broad side, not the tip) to gently loosen and push back cuticles.
- Shorten fingernails with a file and file them into an oval shape (natural nails should be shortened so that a maximum of 2mm protrudes).
- Roughen the natural nail carefully with a file or with a buffer until there is no more shine on the nail. Remove all dust from the nail with a nail brush or dusting brush. Please note that you no longer touch the roughened nail with your bare fingers.
- Determine tip size. Please note that the tip notch fits exactly on the natural nail. The tips should line up exactly with the sides of the nail. It is better to use a larger tip and file it slightly narrower on the sides than a tip that is too small.
- Now stick on the tip with the tip glue. Apply tip glue to the tip notch.
- Note: Then hold the tip down so that the tip adhesive does not run over the entire tip or onto your fingers. The tip must now be placed with the notch on the fingernail in such a way that the notch ends directly with the natural nail. Make sure that no air bubbles form under the tip adhesive surface. If this happens, please carefully file the tip off again. (possibly use a tip remover)
- Determine the length of the nails and use the cutter to shorten the tips and file them into the desired shape.
- File and roughen the tip carefully until it is no longer shiny. File the transition from tip support and natural nail until it is no longer visible. Then remove all dust from the nail with a nail brush or dust brush. Again, please ensure that you no longer touch the roughened nail with your fingers.
- The next step is to use the primer. Please apply primer sparingly to the natural nail and allow to dry briefly. Please make sure that the primer does not get on the cuticles.
- Now the 1st layer is applied (use UV adhesive gel or UV 1-phase gel)
- Apply a thin layer of UV primer gel or 1-phase gel to the entire nail with the gel brush. Please make sure that nothing runs into the edge of the nail. If gel has run into the edge of the nail, carefully remove the gel with a rosewood stick (pointed side). For beginners it makes sense to only apply gel to one finger at a time and then cure briefly in the UV/LED light curing device and then repeat finger by finger. When all fingers are done, please cure completely for 2 minutes. Now repeat the second hand step by step. Important: Do not remove the sweat layer! For French tips, please read the instructions for "French nails"
- After curing, the second layer is applied with the UV building gel or 1-phase gel. Put a small amount directly into the middle of the nail with the gel brush and spread it without applying pressure with the gel brush so that you achieve a beautifully curved nail shape. The highest point should be in the middle of the nail. Please make sure that nothing runs into the edge of the nail. Here, too, it makes sense for beginners to only apply gel to one finger at a time and then briefly cure it in the LED/UV light curing device and then repeat finger by finger. When all fingers are done, please cure completely for 1 to 2 minutes.
- Now carefully remove the sweat layer! Now moisten a cellette with cleaner and carefully wipe off the layer of sweat that has formed so that there is no longer a sticky spot. Now repeat the second hand step by step.
- Now file the nail plate with the file (fine-grain side) and smooth out any unevenness so that the desired nail shape is created. Then matt the nail with the buffer and remove filing marks. The nail must no longer shine.
- Now apply the sealing gel to the third and last layer. Apply the sealing gel thinly from the edge of the nail bed to the tip of the nail. Please make sure that nothing runs into the edge of the nail. Here, too, it is advisable for beginners to work finger by finger individually. Then completely harden all fingers for 2 minutes.
- Here, too, a layer of sweat develops, which should also be carefully removed.
- Now check the nails on the sides for gel residues and file them away carefully if necessary.
- Apply some nail oil to the cuticles and massage in.
Instructions for french nail tips
Apply a thin layer of your chosen French or color gel to the tip of the nail (it doesn't have to be opaque yet) and cure for 15-20 seconds. Now the second layer of French or color is applied, creating a beautiful white or colored French tip. Please do not remove the sweat layer but continue working from step 14.
natural nail reinforcement
If you don't want to lengthen your fingernails (without nail tips) but only strengthen them, then step 5-8 can be omitted. Proceed with all further steps as described.
Filling in the nail modelling
When filling in gel nails, first file the transition of the mature gel nail flat and remove any lift, then carefully file any color, french or pattern, then continue from step 9.
Hints
UV gels must always be cured in a UV light curing device. Between the different work steps, always make sure that the gel jars are not standing directly on the light-curing device, otherwise they will harden in the jar. Make sure that no sunlight shines into the rooms or onto the workplace. Furthermore, you should not work outdoors.
f