- You do not have any products in your shopping cart yet.
Main page » Acrylic » Acrylic Starter Sets » Professional Acrylic Kit - acrylic nail set - nail starter kit - acrylic powder








Professional Acrylic Kit - acrylic nail set - nail starter kit - acrylic powder
Contents
Contents
- 1 x Acrylic powder clear 30g
- 1 x Acrylic powder rose 30g
- 1 x Acrylic powder white 30g
- 1 x Acrylic liquid 100 ml
- 1 x Acrylic brush
- 1 x Glass Dappen dish
- 3 x Professional files curved (grain 100/180)
- 3 x Professional files straight (grain 100/180)
- 1 x Training finger
- 1 x Buffer white
- 1 x High gloss polishing block
- 1 x Cleaner 100 ml
- 1 x Primer
- 1 x Nail tips sorting box with 100 tips
- 1 x Tip glue á 3g
- 10x Rosewood sticks
- 1 x Nail cutter (handle colour varies)
- 1 x Cellulose roll with 250 swabs
- 1 x Step by Step Guide
Instructions for acrylic modeling with nail tips
Before you start, remove any nail polish with nail polish remover. The hands to be treated must then be thoroughly cleaned. Now the hands should be disinfected. Commercial hand disinfectants can be used for this. Cleanliness is the top priority for nail modeling.
1. First, use the cuticle tool to gently remove the cuticles. Then use the rosewood stick to gently push back the cuticles so you can continue working on the nail. For protruding cuticles you can use e.g. a cuticle nipper. If the natural nail is too long, you should shorten it so that the tip can be glued on properly later.
2. Now file the natural nail into shape and then gently matt the nail with the sanding block. This removes the layer of fat. Be careful not to over file the nail. The nail should no longer shine. Pay particular attention to this with new sanding blocks or files!
3. Now take your tip box and look for the appropriate tip that fits the natural nail you have worked on. Be careful not to make the tip too small. It is better to file a tip narrower than choose a tip that is too small and does not fit properly. Try it first without glue and then decide.
4. Now comes one of the most important steps in modeling artificial nails. Sticking on the tip!
The tips have a small contact surface, which you can spread thinly with the tip adhesive. Be careful not to touch the cuticles with the tip glue. Then immediately stick it on the nail. Push the edge of the tip against the nail and press it carefully from the front to the back so that no tension builds up. Important! No air bubbles should form under the tip. If this does happen, use the tip remover to remove the tip from the natural nail.
5. After you have glued the appropriate tips to all the nails, use the tip cutter to shorten the tips to the desired length. Then file the transitions so that they flow smoothly into the natural nail. Leave out the natural nail and do not file. The artificial nail is now also matted and then everything is thoroughly freed from filing dust.
6. Now apply the primer to the natural nail area and allow the primer to air dry for about 30 seconds. Do not apply the primer to the tip!
7. Now prepare the Dappen Dish glass by filling it with the liquid.
Caution! The liquid must always be clear, otherwise the nails can become cloudy.
8. Now dip your brush into the Dappen Dish glass and then wipe it off lightly. Dip the brush into the acrylic powder until a small ball forms at the tip of the brush. If the bead is shiny, it's ready for processing. Distribute it carefully on the nail surface and do not work into the nail edges, otherwise the acrylic can lift faster. Repeat the process (usually 3-5 times) until you have finished the entire nail. Then let it harden for a few minutes.
9. Now you're almost there. Use a file to even out minor bumps and file everything into shape. Then polish the modeling with the polishing block, starting with the coarsest side and then getting finer and finer.
10. You are basically done now. However, it is recommended to apply a protective layer to extend the durability. Well suited for this is, for example, our sun blocker (yellow protection) or our top coat. Before applying, make sure that the nails are free of filing dust.
11. Finally, it is advisable to take some nail oil. Distribute it on the cuticles and massage it in slowly. If desired, put some hand cream on your hands or those of the customer to make everything soft and smooth. This is how you round off the nail modeling and have a wonderful overall result!
Please clean your work equipment thoroughly afterwards. This is especially true for the brush. Otherwise, this can no longer be used for the next modelling.
Before you start, remove any nail polish with nail polish remover. The hands to be treated must then be thoroughly cleaned. Now the hands should be disinfected. Commercial hand disinfectants can be used for this. Cleanliness is the top priority for nail modeling.
1. First, use the cuticle tool to gently remove the cuticles. Then use the rosewood stick to gently push back the cuticles so you can continue working on the nail. For protruding cuticles you can use e.g. a cuticle nipper. If the natural nail is too long, you should shorten it so that the tip can be glued on properly later.
2. Now file the natural nail into shape and then gently matt the nail with the sanding block. This removes the layer of fat. Be careful not to over file the nail. The nail should no longer shine. Pay particular attention to this with new sanding blocks or files!
3. Now take your tip box and look for the appropriate tip that fits the natural nail you have worked on. Be careful not to make the tip too small. It is better to file a tip narrower than choose a tip that is too small and does not fit properly. Try it first without glue and then decide.
4. Now comes one of the most important steps in modeling artificial nails. Sticking on the tip!
The tips have a small contact surface, which you can spread thinly with the tip adhesive. Be careful not to touch the cuticles with the tip glue. Then immediately stick it on the nail. Push the edge of the tip against the nail and press it carefully from the front to the back so that no tension builds up. Important! No air bubbles should form under the tip. If this does happen, use the tip remover to remove the tip from the natural nail.
5. After you have glued the appropriate tips to all the nails, use the tip cutter to shorten the tips to the desired length. Then file the transitions so that they flow smoothly into the natural nail. Leave out the natural nail and do not file. The artificial nail is now also matted and then everything is thoroughly freed from filing dust.
6. Now apply the primer to the natural nail area and allow the primer to air dry for about 30 seconds. Do not apply the primer to the tip!
7. Now prepare the Dappen Dish glass by filling it with the liquid.
Caution! The liquid must always be clear, otherwise the nails can become cloudy.
8. Now dip your brush into the Dappen Dish glass and then wipe it off lightly. Dip the brush into the acrylic powder until a small ball forms at the tip of the brush. If the bead is shiny, it's ready for processing. Distribute it carefully on the nail surface and do not work into the nail edges, otherwise the acrylic can lift faster. Repeat the process (usually 3-5 times) until you have finished the entire nail. Then let it harden for a few minutes.
9. Now you're almost there. Use a file to even out minor bumps and file everything into shape. Then polish the modeling with the polishing block, starting with the coarsest side and then getting finer and finer.
10. You are basically done now. However, it is recommended to apply a protective layer to extend the durability. Well suited for this is, for example, our sun blocker (yellow protection) or our top coat. Before applying, make sure that the nails are free of filing dust.
11. Finally, it is advisable to take some nail oil. Distribute it on the cuticles and massage it in slowly. If desired, put some hand cream on your hands or those of the customer to make everything soft and smooth. This is how you round off the nail modeling and have a wonderful overall result!
Please clean your work equipment thoroughly afterwards. This is especially true for the brush. Otherwise, this can no longer be used for the next modelling.
Acrylic powder clear, rosé and white
The acrylic powder is mixed with the acrylic liquid and spread on the nail with a brush according to the enclosed instructions. Then the nails are air dried. The drying time depends on the ambient temperature and therefore varies. You do not need a light curing device. Acrylic nails are very durable and resilient. Our acrylic powders give the nails a natural and beautiful look. For colored accents such as French and nail design, you can get acrylic color powder in many sensational colors in our shop.
Acrylic liquid liquid
Acrylic liquid is required for every modeling with acrylic powder. Beautiful nail modeling is possible with acrylic powder and acrylic liquid.
acrylic brush
The acrylic brush is required for mixing the liquid with the powder and for modelling.
Dappen dish glass
The Dappen Dish Glass is the perfect accessory to make mixing and mixing gels, acrylic powders and liquids easier. For acrylic modelling, you always need a Dappen Dish glass to prepare the acrylic mass. Since an acrylic modellage, in contrast to UV gels, has to be touched up again and again during a modellage, the Dappen Dish glass is ideal for this. Furthermore, the Dappen Dish glass can also be used for all liquids such as brush cleaners or disinfectants.
Curved professional file
In a nail salon or in a manicure, 2 types of nail files are used. One of them is the so-called banana file. With its curved shape, this nail file is best suited for the oval or rounded shape of the nails. You have the right momentum with the nail file to work out the shape. With our nail file you work effectively and professionally. Cleaned with the cleaner, it can quickly be used by the next customer. Of course, the banana files are of studio quality. Convince yourself of the quality and the handling and you will see that your customers don't want to do without this type of nail file anymore and have it ready to take at home.
Professional file straight
When working in a nail salon or manicure, there are 2 types of nail files. One of them is the straight, narrow nail file. With this shape, the nail file can be used best for working on the side parts of the nail. Thanks to this file, you can work cleanly, quickly and with a very good result. The nail file can be quickly cleaned with cleaner and is ready for the next use. The straight nail file should not be missing in any nail salon. Many customers see the handling, the quality of the nail file when they visit and of course would like to have a file for home use as well. It is therefore advisable to always have a few of these files ready for resale.
practice fingers
Facilitates learning nail modeling. Suitable for nail tips and modeling technique. Simply stick tips on the practice finger. Please do not completely, otherwise the tip can be difficult to remove.
This practice finger also offers the possibility to practice all nail art patterns on one tip. Attach tip to practice finger, file lightly and begin pattern. You don't need a model with your finger and you can practice or test new nail art creations at any time.
buffers
Various tools are used in nail modeling or manicure. One of them is the buffer. The buffer is a block with 4 filing surfaces. It is particularly well suited for removing fine to medium-sized bumps on the nails and on the edges of the nails. The buffer is gentle on your customers cuticles and sensitive nail edges.
It is used after applying the gels or acrylics and gives the perfect final touch before applying the nail polish. You can use the buffer to mattify the natural nails and at the same time roughen the nails slightly. As a result, nail modeling or varnishes last much longer.
High gloss polishing block
A polishing block is used for a manicure or nail modeling with acrylic or UV gel technology. Due to the 4-sided surfaces with different grain sizes, this filing block can be used in many ways. With this polishing block, slight to medium bumps can be quickly removed. Fingernails can be polished to a high gloss with ease. When modeling nails with acrylic or gel, the high-gloss polishing block ensures a radiant shine after the modeling is complete.
Cleaner / nail cleaner
The nail cleaner is part of the basic equipment for a perfect nail design and good nail care.
It is needed to remove filing dust. In addition, the nail cleaner fights germs on the nail and is also suitable for cleaning brushes and other tools and for removing damaged modeling. The Nail Cleaner has an antibacterial effect and is well tolerated by the natural nail. With the nail cleaner you can also quickly and easily clean all tools of germs and filing dust. Simply put on a cellette and use it to wipe off all tools. Since you have constantly changing customer contact, you ensure a clean and hygienic way of working.
primers
The primer is an adhesion promoter that is used in nail modelling. Both for UV gels and for all common acrylic systems. The reinforcement created by the primer gives a better hold. Important! Apply the primer sparingly and avoid getting into the cuticles as this can cause stinging. Therefore, proper application in this area is very important.
Nail tips sorting box
Practical nail tips sorting box with 10 different sizes, 10 nail tips each, extra flat C-curve. Extremely easy processing, super flexible materials.
tip glue
Tip glue for gluing nail tips. Perfect tip adhesive with super-fast adhesion between natural and artificial nails. Easily flowing tip glue. The tip adhesive is designed for nail studio tips. Tip glue is very easy to apply and economical to use.
nail cutters
The Nail Cutter is a professional cutting tool for shortening artificial fingernails. An indispensable tool for every nail salon. With a good nail cutter, you can shorten natural nails, nail tips and artificial fingernails without splitting or breaking.
rosewood sticks
High-quality natural wood for gently cleaning and pushing back the cuticles. For nail modeling, manicures and pedicures.
cellular roll
Our cellulose swabs are the perfect tool for cleaning your nails before, during and after modelling. The cellettes are lint-free and versatile. These celllets are also ideal for cleaning brushes.
The acrylic powder is mixed with the acrylic liquid and spread on the nail with a brush according to the enclosed instructions. Then the nails are air dried. The drying time depends on the ambient temperature and therefore varies. You do not need a light curing device. Acrylic nails are very durable and resilient. Our acrylic powders give the nails a natural and beautiful look. For colored accents such as French and nail design, you can get acrylic color powder in many sensational colors in our shop.
Acrylic liquid liquid
Acrylic liquid is required for every modeling with acrylic powder. Beautiful nail modeling is possible with acrylic powder and acrylic liquid.
acrylic brush
The acrylic brush is required for mixing the liquid with the powder and for modelling.
Dappen dish glass
The Dappen Dish Glass is the perfect accessory to make mixing and mixing gels, acrylic powders and liquids easier. For acrylic modelling, you always need a Dappen Dish glass to prepare the acrylic mass. Since an acrylic modellage, in contrast to UV gels, has to be touched up again and again during a modellage, the Dappen Dish glass is ideal for this. Furthermore, the Dappen Dish glass can also be used for all liquids such as brush cleaners or disinfectants.
Curved professional file
In a nail salon or in a manicure, 2 types of nail files are used. One of them is the so-called banana file. With its curved shape, this nail file is best suited for the oval or rounded shape of the nails. You have the right momentum with the nail file to work out the shape. With our nail file you work effectively and professionally. Cleaned with the cleaner, it can quickly be used by the next customer. Of course, the banana files are of studio quality. Convince yourself of the quality and the handling and you will see that your customers don't want to do without this type of nail file anymore and have it ready to take at home.
Professional file straight
When working in a nail salon or manicure, there are 2 types of nail files. One of them is the straight, narrow nail file. With this shape, the nail file can be used best for working on the side parts of the nail. Thanks to this file, you can work cleanly, quickly and with a very good result. The nail file can be quickly cleaned with cleaner and is ready for the next use. The straight nail file should not be missing in any nail salon. Many customers see the handling, the quality of the nail file when they visit and of course would like to have a file for home use as well. It is therefore advisable to always have a few of these files ready for resale.
practice fingers
Facilitates learning nail modeling. Suitable for nail tips and modeling technique. Simply stick tips on the practice finger. Please do not completely, otherwise the tip can be difficult to remove.
This practice finger also offers the possibility to practice all nail art patterns on one tip. Attach tip to practice finger, file lightly and begin pattern. You don't need a model with your finger and you can practice or test new nail art creations at any time.
buffers
Various tools are used in nail modeling or manicure. One of them is the buffer. The buffer is a block with 4 filing surfaces. It is particularly well suited for removing fine to medium-sized bumps on the nails and on the edges of the nails. The buffer is gentle on your customers cuticles and sensitive nail edges.
It is used after applying the gels or acrylics and gives the perfect final touch before applying the nail polish. You can use the buffer to mattify the natural nails and at the same time roughen the nails slightly. As a result, nail modeling or varnishes last much longer.
High gloss polishing block
A polishing block is used for a manicure or nail modeling with acrylic or UV gel technology. Due to the 4-sided surfaces with different grain sizes, this filing block can be used in many ways. With this polishing block, slight to medium bumps can be quickly removed. Fingernails can be polished to a high gloss with ease. When modeling nails with acrylic or gel, the high-gloss polishing block ensures a radiant shine after the modeling is complete.
Cleaner / nail cleaner
The nail cleaner is part of the basic equipment for a perfect nail design and good nail care.
It is needed to remove filing dust. In addition, the nail cleaner fights germs on the nail and is also suitable for cleaning brushes and other tools and for removing damaged modeling. The Nail Cleaner has an antibacterial effect and is well tolerated by the natural nail. With the nail cleaner you can also quickly and easily clean all tools of germs and filing dust. Simply put on a cellette and use it to wipe off all tools. Since you have constantly changing customer contact, you ensure a clean and hygienic way of working.
primers
The primer is an adhesion promoter that is used in nail modelling. Both for UV gels and for all common acrylic systems. The reinforcement created by the primer gives a better hold. Important! Apply the primer sparingly and avoid getting into the cuticles as this can cause stinging. Therefore, proper application in this area is very important.
Nail tips sorting box
Practical nail tips sorting box with 10 different sizes, 10 nail tips each, extra flat C-curve. Extremely easy processing, super flexible materials.
tip glue
Tip glue for gluing nail tips. Perfect tip adhesive with super-fast adhesion between natural and artificial nails. Easily flowing tip glue. The tip adhesive is designed for nail studio tips. Tip glue is very easy to apply and economical to use.
nail cutters
The Nail Cutter is a professional cutting tool for shortening artificial fingernails. An indispensable tool for every nail salon. With a good nail cutter, you can shorten natural nails, nail tips and artificial fingernails without splitting or breaking.
rosewood sticks
High-quality natural wood for gently cleaning and pushing back the cuticles. For nail modeling, manicures and pedicures.
cellular roll
Our cellulose swabs are the perfect tool for cleaning your nails before, during and after modelling. The cellettes are lint-free and versatile. These celllets are also ideal for cleaning brushes.