Nail Starter Set with Hand Rest - professional nail kit - nail starter kit

UV-LED combi device - Dual LED lamp UV-LED combi device Model and color may vary - UV-LED combi device is equipped with a light barrier and has a three-stage timer. Picture is an example. Removable base plate, therefore also suitable for foot modelling.
Application: Intelligent dual LED lamp based on new generation dual LED / UV.LEDs. The lamp can cure all types of gels and hybrid varnishes with UV and LED photoinitiators.

hand rest
This lightweight palm rest provides comfortable foam padding for hands and wrists. This allows the customer to relax comfortably during a nail modeling or manicure. This hand rest is also perfect for a pedicure. The velvety-soft terry cloth cover, which has a Velcro fastener and can therefore be washed quickly, is a great advantage. These hand rests are available in five different colors.

UV gel primer gel
In order to be able to model a professional and flawless nail modeling with UV gel, you need, among other things, a primer gel. This UV primer gel is indispensable for the first layer. The primer gel is applied thinly to the prepared nail and hardened for 2 minutes.

UV gel builder gel
With this UV gel builder you can easily and quickly model your fingernails. Cure the UV builder gel for 2 minutes

UV gel French gel white
Artificial nails with brilliant white nail tips can be achieved with our French gel white. The UV Gel French white is easy to apply. Cure UV Gel French white for 2 minutes.

UV gel sealing gel
Apply a thin layer of UV gel sealing gel and harden for 2 minutes. UV gel sealing gel gives your nail modeling high-gloss nails.

Cleaner / degreaser
Cleaner / degreaser to remove the grease layer. The sweat layer is created when the UV gels harden. With cleaner / degreaser, the sweat layer is easily removed. Cleaner/degreaser creates a perfect shine after the finish gels have been applied and hardened. The natural nail and the filed nail model can be cleaned with cleaner/degreaser.

nail file
Nail file white professional file 100/180 grit. The nail file narrow/straight is especially suitable for professional nail modelling. The nail file has a 100/180 grit so that fine and coarse filing work can be done easily. With this nail file, fingernails can be easily shortened, fingernails shaped, and all bumps and liftings removed effortlessly. The nail file can be disinfected with standard disinfectants.

tip glue
Perfect tip adhesive with super-fast adhesion between natural and artificial nails. Easily flowing tip glue. The tip glue is designed for nail studio tips. The tip glue is very easy to apply and economical to use.

rosewood sticks
High-quality natural wood for gently cleaning and pushing back the cuticles. For nail modeling, manicures and pedicures.

nail tips
Practical nail tips sorting box with 10 different sizes, 10 nail tips each, extra flat C-curve. Extremely easy processing, super flexible materials.

brush set
With our brush set you get all the necessary gel brushes for nail modeling. These three variants are part of the basic equipment in a nail salon. The straight gel brushes can be used to apply the UV gels. With the slanted artificial hair brush you can apply a smile line to the nail tip in a wonderful and uncomplicated way.

Cellettes
Our cellulose swabs are the perfect tool for cleaning the nails before, during and after modelling. The cellettes are lint-free and versatile. These celllets are also ideal for cleaning brushes.

nail cutters
The nail cutter is a professional cutting tool for shortening artificial fingernails. The nail cutter is an indispensable tool in the nail salon. With a good nail cutter, you can shorten natural nails, nail tips and artificial fingernails without splitting or breaking.

primers
Primer is an adhesion promoter for nail design, UV gel and acrylic systems. The primer ensures 100% hold even with problem nails. Primer applied thinly to the natural nail. The primer strengthens the adhesion between the UV gel and the natural nail. Avoid getting the primer on the cuticles.

practice fingers
Practice finger suitable for learning nail modeling for nail tips and modeling technique. This practice finger also offers the possibility to practice all nail art patterns on one tip. Attach tip to practice finger, file lightly and begin pattern.

Before you start with your first nail modelling, you should set up your workplace so that you have all the utensils to hand. Provide sufficient lighting at your workplace, possibly with an additional work lamp. UV light curing device, UV gels, files, buffers, cells, tip box, tip glue, cutter, brush, cleaner, dust brush, nail oil and possibly all nail art products such as stamp sets, glitter powder, rhinestones, etc. should be ready.

Instructions for remodeling

1. Wash hands thoroughly and dry well before starting. Remove nails from nail polish if necessary.
2. Use a spatula or rosewood stick (broad side, not the tip) to gently loosen and push back cuticles.
3. Shorten fingernails with a file and file them into an oval shape (natural nails should be shortened so that a maximum of 2mm protrudes).
4. Roughen the natural nail carefully with a file or with a buffer until there is no more shine on the nail. Remove all dust from the nail with a nail brush or dusting brush. Please note that you no longer touch the roughened nail with your bare fingers.
5. Determine tip size. Please note that the tip notch fits exactly on the natural nail. The tips should line up exactly with the sides of the nail. It is better to use a larger tip and file it slightly narrower on the sides than a tip that is too small.
6. Now stick on the tip with the tip glue. Apply tip glue to the tip notch.
7. Note: Then hold the tip down so that the tip adhesive does not run over the entire tip or onto your fingers. The tip must now be placed with the notch on the fingernail in such a way that the notch ends directly with the natural nail. Make sure that no air bubbles form under the tip adhesive surface. If this happens, please carefully file the tip off again. (possibly use a tip remover)
8. Determine the length of the nails and use the cutter to shorten the tips and file them into the desired shape.
9. File and roughen the tip carefully until it is no longer shiny. File the transition from tip support and natural nail until it is no longer visible. Then remove all dust from the nail with a nail brush or dust brush. Again, please ensure that you no longer touch the roughened nail with your fingers.
10. The next step is to use the primer. Please apply primer sparingly to the natural nail and allow to dry briefly. Please make sure that the primer does not get on the cuticles.
11. Now the 1st layer is applied (use UV adhesive gel or UV 1-phase gel)
12. Apply a thin layer of UV primer gel or 1-phase gel to the entire nail with the gel brush. Please make sure that nothing runs into the edge of the nail. If gel has run into the edge of the nail, carefully remove the gel with a rosewood stick (pointed side). For beginners it makes sense to only apply gel to one finger at a time and then cure briefly in the UV/LED light curing device and then repeat finger by finger. When all fingers are done, please cure completely for 2 minutes. Now repeat the second hand step by step. Important: Do not remove the sweat layer! For French tips, please read the instructions for "French nails"
13. After curing, the second layer is applied with the UV building gel or 1-phase gel. Put a small amount directly into the middle of the nail with the gel brush and spread it without applying pressure with the gel brush so that you achieve a beautifully curved nail shape. The highest point should be in the middle of the nail. Please make sure that nothing runs into the edge of the nail. Here, too, it makes sense for beginners to only apply gel to one finger at a time and then briefly cure it in the LED/UV light curing device and then repeat finger by finger. When all fingers are done, please cure completely for 1 to 2 minutes.
14. Now carefully remove the sweat layer! Now moisten a cellette with cleaner and carefully wipe off the layer of sweat that has formed so that there is no longer a sticky spot. Now repeat the second hand step by step.
15. Now file the nail plate with the file (fine-grain side) and smooth out any unevenness so that the desired nail shape is created. Then matt the nail with the buffer and remove filing marks. The nail must no longer shine.
16. Now apply the sealing gel to the third and last layer. Apply the sealing gel thinly from the edge of the nail bed to the tip of the nail. Please make sure that nothing runs into the edge of the nail. Here, too, it is advisable for beginners to work finger by finger individually. Then completely harden all fingers for 2 minutes.
17. Here, too, a layer of sweat develops, which should also be carefully removed.
18. Now check the nails on the sides for gel residues and file them away carefully if necessary.
19. Apply some nail oil to the cuticles and massage in.

Instructions for french nail tips
Apply a thin layer of your chosen French or color gel to the tip of the nail (it doesn't have to be opaque yet) and cure for 15-20 seconds. Now the second layer of French or color is applied, creating a beautiful white or colored French tip. Please do not remove the sweat layer but continue working from step 14.

natural nail reinforcement
If you don't want to lengthen your fingernails (without nail tips) but only strengthen them, then step 5-8 can be omitted. Proceed with all further steps as described.

Filling in the nail modelling
When filling in gel nails, first file the transition of the mature gel nail flat and remove any lift, then carefully file any color, french or pattern, then continue from step 9.

Hints
UV gels must always be cured in a UV light curing device. Between the different work steps, always make sure that the gel jars are not standing directly on the light-curing device, otherwise they will harden in the jar. Make sure that no sunlight shines into the rooms or onto the workplace. Furthermore, you should not work outdoors.

f