- You do not have any products in your shopping cart yet.
Acrylic set professional - nail studio starter set
.jpg)
Acrylic set professional - nail studio starter set
The classic acrylic starter set for modeling with artificial fingernails. This acrylic starter set contains all the items you need to successfully start acrylic modelling.
Contents:
- 1x acrylic powder clear 30g
- 1x acrylic powder rose 30g
- 1x acrylic powder white 30g
- 1x Acryl Liquid liquid 100 ml
- 1x acrylic brush
- 1x dappen dish glass
- 3x professional file curved (grain 100/180)
- 3x professional file straight (grain 100/180)
- 1x practice fingers
- 1x buffer white
- 1x high gloss polishing block
- 1x cleaner 100 ml
- 1x primer
- 1x Nail Tips sorting box with 100 tips
- 1x tip glue á 3g
- 10x rosewood sticks
- 1x nail cutter (color of handle varies)
- 1x cell roll with 250 cells
- 1x step-by-step instructions
Acrylic powder clear, rosé and white
The acrylic powder is mixed together with the acrylic liquid and then applied to the nail using a brush according to the enclosed instructions. After application, the nails are air-dried. The drying time depends on the ambient temperature and may therefore vary. A special light-curing device is not required. Acrylic nails are known for their high durability and strength. Our acrylic powders give the nails a natural and beautiful appearance. For colorful highlights such as French nails and nail designs, we offer acrylic colored powders in a variety of sensational colors.
acrylic liquid
For every acrylic powder modeling, acrylic liquid is needed to achieve a great result.
acrylic brush
The acrylic brush is needed to mix and shape the liquid with the powder.
Dappen dish glass
To simplify the mixing and stirring of gels, acrylic powder, and liquids, the Dappen Dish Glass is the ideal accessory. When performing an acrylic modeling, it is always necessary to use the Dappen Dish Glass for preparing the acrylic mixture. It is also excellent for all types of liquids such as brush cleaner or disinfectant.
Banana file
Our nail file is best suited for oval or rounded shaped nails due to its curved form. Additionally, it allows for easier work when building up the individual layers on the upper area of the nail and simplifies the avoidance of the cuticle. With this nail file, you will achieve effective and professional results.
Nail file straight/narrow
Specifically designed for use in professional nail modeling, this file is suitable for both fine and coarse finishing work. It is ideal for trimming, shaping, removing ridges, and lifting. The file can be easily cleaned with conventional disinfectants.
Practice finger
Supports learning nail modeling. Suitable for nail tips and modeling techniques. Simply stick the tips on the finger practice device. Do not attach them completely as it will make it difficult to remove the tip.
With this finger practice device, you can also practice all nail art designs on a tip. Attach the tip to the finger practice device, file it lightly, and start with the design. You don't need a model with the finger practice device, and you can practice or test new nail art creations anytime.
The file block has four sides and a uniform grit. It is ideal for roughing up the natural nails and performing fine filing work after shaping to correct minor imperfections. The buffer can be easily disinfected with commercially available disinfectants.
High gloss polishing block
The high-gloss polishing block is ideal for quickly eliminating small and medium imperfections. After applying acrylic or gel to nails, this polishing block provides a radiant shine.
Cleaner / degreaser
The cleaner contains isopropanol and has an antibacterial effect. It is compatible with the natural nail, removes the dispersion film after curing, degreases and disinfects the natural nail, and is suitable for removing gel residues. The cleaner is also used for cleaning brushes and tools.
primersOur primer ensures a reliable hold, even on difficult nails. Please only apply the primer thinly on the natural nail. It improves the bond between the UV gel and the natural nail. Make sure not to apply the primer on the cuticles!
Nail tips sorting box
Practical Nail Tips sorting box with 10 different sizes of 10 Nail Tips each, extra flat C-curve. Extremely easy to handle, super flexible materials.
tip glue
Nail glue for attaching nail tips. Perfect nail glue with super fast adhesion between natural and artificial nails. Easy-flowing nail glue. The nail glue is designed for use with nail studio tips. Nail glue is easy to apply and has a long-lasting effect.
rosewood sticks
Natural woods for gentle cleansing and care of the cuticles. Perfect for nail modeling, manicure, and pedicure.
nail cutters
The nail clipper is a professional cutting tool that allows you to trim artificial nails. With a high-quality nail clipper, you can cut natural nails, nail tips, and artificial nails without them splitting or breaking.
Cellettes
The cellulose swabs are perfect tools for cleaning the nails before, during, and after nail modeling. They are lint-free and versatile in their applications. Additionally, they are also excellent for cleaning brushes.
Instructions for acrylic modeling with nail tips
Before you start, remove any nail polish with nail polish remover. The hands to be treated must then be thoroughly cleaned. Now the hands should be disinfected. Commercial hand disinfectants can be used for this. Cleanliness is the top priority for nail modeling.
1. First, use the cuticle tool to gently remove the cuticles. Then use the rosewood stick to gently push back the cuticles so you can continue working on the nail. For protruding cuticles you can use e.g. a cuticle nipper. If the natural nail is too long, you should shorten it so that the tip can be glued on properly later.
2. Now file the natural nail into shape and then gently matt the nail with the sanding block. This removes the layer of fat. Be careful not to over file the nail. The nail should no longer shine. Pay particular attention to this with new sanding blocks or files!
3. Now take your tip box and look for the appropriate tip that fits the natural nail you have worked on. Be careful not to make the tip too small. It is better to file a tip narrower than choose a tip that is too small and does not fit properly. Try it first without glue and then decide.
4. Now comes one of the most important steps in modeling artificial nails. Sticking on the tip!
The tips have a small contact surface, which you can spread thinly with the tip adhesive. Be careful not to touch the cuticles with the tip glue. Then immediately stick it on the nail. Push the edge of the tip against the nail and press it carefully from the front to the back so that no tension builds up. Important! No air bubbles should form under the tip. If this does happen, use the tip remover to remove the tip from the natural nail.
5. After you have glued the appropriate tips to all the nails, use the tip cutter to shorten the tips to the desired length. Then file the transitions so that they flow smoothly into the natural nail. Leave out the natural nail and do not file. The artificial nail is now also matted and then everything is thoroughly freed from filing dust.
6. Now apply the primer to the natural nail area and allow the primer to air dry for about 30 seconds. Do not apply the primer to the tip!
7. Now prepare the Dappen Dish glass by filling it with the liquid.
Caution! The liquid must always be clear, otherwise the nails can become cloudy.
8. Now dip your brush into the Dappen Dish glass and then wipe it off lightly. Dip the brush into the acrylic powder until a small ball forms at the tip of the brush. If the bead is shiny, it's ready for processing. Distribute it carefully on the nail surface and do not work into the nail edges, otherwise the acrylic can lift faster. Repeat the process (usually 3-5 times) until you have finished the entire nail. Then let it harden for a few minutes.
9. Now you're almost there. Use a file to even out minor bumps and file everything into shape. Then polish the modeling with the polishing block, starting with the coarsest side and then getting finer and finer.
10. You are basically done now. However, it is recommended to apply a protective layer to extend the durability. Well suited for this is, for example, our sun blocker (yellow protection) or our top coat. Before applying, make sure that the nails are free of filing dust.
11. Finally, it is advisable to take some nail oil. Distribute it on the cuticles and massage it in slowly. If desired, put some hand cream on your hands or those of the customer to make everything soft and smooth. This is how you round off the nail modeling and have a wonderful overall result!
Please clean your work equipment thoroughly afterwards. This is especially true for the brush. Otherwise, this can no longer be used for the next modelling.
Before you start, remove any nail polish with nail polish remover. The hands to be treated must then be thoroughly cleaned. Now the hands should be disinfected. Commercial hand disinfectants can be used for this. Cleanliness is the top priority for nail modeling.
1. First, use the cuticle tool to gently remove the cuticles. Then use the rosewood stick to gently push back the cuticles so you can continue working on the nail. For protruding cuticles you can use e.g. a cuticle nipper. If the natural nail is too long, you should shorten it so that the tip can be glued on properly later.
2. Now file the natural nail into shape and then gently matt the nail with the sanding block. This removes the layer of fat. Be careful not to over file the nail. The nail should no longer shine. Pay particular attention to this with new sanding blocks or files!
3. Now take your tip box and look for the appropriate tip that fits the natural nail you have worked on. Be careful not to make the tip too small. It is better to file a tip narrower than choose a tip that is too small and does not fit properly. Try it first without glue and then decide.
4. Now comes one of the most important steps in modeling artificial nails. Sticking on the tip!
The tips have a small contact surface, which you can spread thinly with the tip adhesive. Be careful not to touch the cuticles with the tip glue. Then immediately stick it on the nail. Push the edge of the tip against the nail and press it carefully from the front to the back so that no tension builds up. Important! No air bubbles should form under the tip. If this does happen, use the tip remover to remove the tip from the natural nail.
5. After you have glued the appropriate tips to all the nails, use the tip cutter to shorten the tips to the desired length. Then file the transitions so that they flow smoothly into the natural nail. Leave out the natural nail and do not file. The artificial nail is now also matted and then everything is thoroughly freed from filing dust.
6. Now apply the primer to the natural nail area and allow the primer to air dry for about 30 seconds. Do not apply the primer to the tip!
7. Now prepare the Dappen Dish glass by filling it with the liquid.
Caution! The liquid must always be clear, otherwise the nails can become cloudy.
8. Now dip your brush into the Dappen Dish glass and then wipe it off lightly. Dip the brush into the acrylic powder until a small ball forms at the tip of the brush. If the bead is shiny, it's ready for processing. Distribute it carefully on the nail surface and do not work into the nail edges, otherwise the acrylic can lift faster. Repeat the process (usually 3-5 times) until you have finished the entire nail. Then let it harden for a few minutes.
9. Now you're almost there. Use a file to even out minor bumps and file everything into shape. Then polish the modeling with the polishing block, starting with the coarsest side and then getting finer and finer.
10. You are basically done now. However, it is recommended to apply a protective layer to extend the durability. Well suited for this is, for example, our sun blocker (yellow protection) or our top coat. Before applying, make sure that the nails are free of filing dust.
11. Finally, it is advisable to take some nail oil. Distribute it on the cuticles and massage it in slowly. If desired, put some hand cream on your hands or those of the customer to make everything soft and smooth. This is how you round off the nail modeling and have a wonderful overall result!
Please clean your work equipment thoroughly afterwards. This is especially true for the brush. Otherwise, this can no longer be used for the next modelling.
