Before you start, remove any nail polish with nail polish remover. The hands to be treated must then be thoroughly cleaned. Now the hands should be disinfected. Commercial hand disinfectants can be used for this. Cleanliness is the top priority for nail modeling.

Instructions for acrylic modeling template technique
1. First, use the cuticle tool to gently remove the cuticles. Then use the rosewood stick to gently push back the cuticles so you can continue working on the nail. For protruding cuticles you can use e.g. a cuticle nipper. If the natural nail is too long, you should shorten it so that the tip can be glued on properly later.

2. Now file the natural nail into shape and then gently matt the nail with the sanding block. This removes the layer of fat. Be careful not to over file the nail. The nail should no longer shine. Pay particular attention to this with new sanding blocks or files!

3. Now apply the primer to the natural nail area and allow the primer to air dry for about 30 seconds.

4. Now take a modeling template and place it underneath your nail. Glue the bottom side together. So that a kind of bag is created.

5. Now prepare the Dappen Dish glass by filling it with the liquid.
 Caution! The liquid must always be clear, otherwise the nails can become cloudy.

6. Now dip your brush into the Dappen Dish glass and then wipe it off lightly. Dip the brush into the acrylic powder until a small ball forms at the tip of the brush. If the bead is shiny, it's ready for processing. Distribute it carefully on the nail surface and do not work into the nail edges, otherwise the acrylic can lift faster. Repeat the process (usually 3-5 times) until you have finished the entire nail. Then let it harden for a few minutes.

7. Now you're almost there. Use a file to even out minor bumps and file everything into shape. Then polish the modeling with the polishing block, starting with the coarsest side and then getting finer and finer.

8. You are basically done now. However, it is recommended to apply a protective layer to extend the durability. Well suited for this is, for example, our sun blocker (yellow protection) or our top coat. Before applying, make sure that the nails are free of filing dust.

9. Finally, it is advisable to take some nail oil. Distribute it on the cuticles and massage it in slowly. If desired, put some hand cream on your hands or those of the customer to make everything soft and smooth. This is how you round off the nail modeling and have a wonderful overall result!

Instructions for acrylic modeling with nail tips

Before you start, remove any nail polish with nail polish remover. The hands to be treated must then be thoroughly cleaned. Now the hands should be disinfected. Commercial hand disinfectants can be used for this. Cleanliness is the top priority for nail modeling.

1. First, use the cuticle tool to gently remove the cuticles. Then use the rosewood stick to gently push back the cuticles so you can continue working on the nail. For protruding cuticles you can use e.g. a cuticle nipper. If the natural nail is too long, you should shorten it so that the tip can be glued on properly later.

2. Now file the natural nail into shape and then gently matt the nail with the sanding block. This removes the layer of fat. Be careful not to over file the nail. The nail should no longer shine. Pay particular attention to this with new sanding blocks or files!

3. Now take your tip box and look for the appropriate tip that fits the natural nail you have worked on. Be careful not to make the tip too small. It is better to file a tip narrower than choose a tip that is too small and does not fit properly. Try it first without glue and then decide.

4. Now comes one of the most important steps in modeling artificial nails. Sticking on the tip!
The tips have a small contact surface, which you can spread thinly with the tip adhesive. Be careful not to touch the cuticles with the tip glue. Then immediately stick it on the nail. Push the edge of the tip against the nail and press it carefully from the front to the back so that no tension builds up. Important! No air bubbles should form under the tip. If this does happen, use the tip remover to remove the tip from the natural nail.

5. After you have glued the appropriate tips to all the nails, use the tip cutter to shorten the tips to the desired length. Then file the transitions so that they flow smoothly into the natural nail. Leave out the natural nail and do not file. The artificial nail is now also matted and then everything is thoroughly freed from filing dust.

6. Now apply the primer to the natural nail area and allow the primer to air dry for about 30 seconds. Do not apply the primer to the tip!

7. Now prepare the Dappen Dish glass by filling it with the liquid.
 Caution! The liquid must always be clear, otherwise the nails can become cloudy.

8. Now dip your brush into the Dappen Dish glass and then wipe it off lightly. Dip the brush into the acrylic powder until a small ball forms at the tip of the brush. If the bead is shiny, it's ready for processing. Distribute it carefully on the nail surface and do not work into the nail edges, otherwise the acrylic can lift faster. Repeat the process (usually 3-5 times) until you have finished the entire nail. Then let it harden for a few minutes.

9. Now you're almost there. Use a file to even out minor bumps and file everything into shape. Then polish the modeling with the polishing block, starting with the coarsest side and then getting finer and finer.

10. You are basically done now. However, it is recommended to apply a protective layer to extend the durability. Well suited for this is, for example, our sun blocker (yellow protection) or our top coat. Before applying, make sure that the nails are free of filing dust.

11. Finally, it is advisable to take some nail oil. Distribute it on the cuticles and massage it in slowly. If desired, put some hand cream on your hands or those of the customer to make everything soft and smooth. This is how you round off the nail modeling and have a wonderful overall result!

Acrylic powder clear, rose and white
The acrylic powders are mixed with the acrylic liquid and spread with a brush on the nail according to the enclosed instructions. Thereafter, the nails are air dried. The drying time is dependent on the ambient temperature and, therefore, varies. You do not need a curing device. Acrylic nails are very durable and resilient. Our acrylic powders give the nails a natural and beautiful look. For coloured accents such as French and nail design you can use acrylic colour powder in many sensational colours form our shop.

Acrylic colour powder
For coloured accents such as French and nail art acrylic colour powders are used. These are mixed with the acrylic liquid and piecemeal spread with a brush in small beads on the nail. Thereafter, the nails are air dried. The drying time is dependent on the ambient temperature and, therefore, varies. You do not need a curing device. Acrylic nails are very durable and resilient. The acrylic colour powder is available in many stunning colours from us.

Acrylic liquid
Acrylic liquid is required for each layer of acrylic powder. Through the acrylic powder with liquid acrylic beautiful nails are possible.

Acrylic brushes
3 pcs. brush set for every occasion. Sculpting and design of magnificently decorated nails.

Dappen Dish glass
To facilitate mixing and stirring the gels, acrylic powders and liquids the glass Dappen dish Glass is the perfect accessory. For acrylic sculpting you need always a glass Dappen dish for the preparation of the acrylic mass. Also suitable for all liquids such as brush cleaner or disinfectant.

Professional file curved
In a nail salon or manicure salon  2 kinds of nail files are used. One is the so-called banana file. With its curved form, this nail file is best suited to the oval or rounded shape of the nails. You have the proper way to work on the shape with this nail file. With our nail file you work effectively and professionally. Cleaned with the cleaner, it can quickly be used for the next customer. Of course, the banana files have studio quality. Convince yourself of the quality and handling, and you will see, your customers do not want to be without this kind of nail file wish to have it also at home.

Professional file straight
For working in a nail salon or as manicurist, there are two types of nail files. One is the straight, narrow nail file. With this form, the nail file can be used to work on the sides of the nail optimally. With this file you can work cleanly, quickly and with a very good result. The nail file can be quickly cleaned with cleaner and is ready for the next use. This straight nail file is a must for any nail salon.Many customers while visiting see its used, the quality of the nail file and want of course also to have a file for home use. Therefore, it is advisable to have at hand always some of those files for resale.

Training finger
Helps when learning to sculpt nails. Suitable for nail tips and sculpting techniques. Just stick  the tips on the of the training finger. Please do not do this completely, since the tip can be otherwise difficult to remove.
This training finger also offers the possibility to practice all nail patterns on a tip. Fix tip to the training finger, slightly file and begin to create the pattern. You need on account of this finger no model and can practice any time or test new nail pattern creations.

Buffer
In nail sculpting or manicure different tools are used. One of them is the buffer. The buffer is a block consisting of four filing surfaces. It is particularly suitable when removing the fine to medium unevenness on the nails and the nail edges. The buffer is gentle on cuticles and the sensitive nail edges of your customers.
It is used after the application of the gels or acrylics and gives the last perfect finish before the nail lacquers are applied. The buffer can be used for matting of natural nails, and for easy roughening at the same time. On account of this nail sculpting or polish is more durable.

High gloss polishing block
A polishing block is used in manicuring or nail sculpting with the acrylic or UV gel techniques.  Through the 4-sided surfaces with different fine grain this filing block finds many uses. With this polishing block light to medium bumps can be eliminated quickly. Nails can be buffed with ease to a high gloss. In nail sculpting with acrylic or gel layers the high-gloss polishing block ensures after completion a radiant shine.

Cleaner/nail cleaner
Part of the basic equipment for a perfect nail design and good nail care is nail cleaner.
It is required to remove filings. In addition to combating germs on the nails the nail is also suitable for cleaning brushes, other work tools and removing unsuccessful sculpting layers. The nail cleaner has an antibacterial effect and is well tolerated by the natural nail. With the nail cleaner one can clean quickly and easily all sources of germs and filings. Simply apply to a cellulose pad and wipe down all equipment. Since you have constantly changing customer contact, you can thus ensure clean and hygienic operation.

Primer
The primer is a bonding agent which is used in nail sculpting. Both for UV gels, as well as for all standard acrylic systems. Through the support given by the primer, a better grip is guaranteed. Important! Apply the primer sparingly and do not let it come into contact with cuticles, as this may cause a burning sensation. Therefore, the proper use is very important in this area.

Nail tips assortment box
Practical nail tips with 10 different  Sizes of each10 nail tips, extra-flat C curve. Extremely easy processing, super flexible materials.

Tip glue
Tip glue for gluing nail tips. Perfect tip glue with super fast adhesion between the natural and artificial nail. Easy flowing tip glue. The tip glue is attuned to the tips in the nail salon. Tip glue is easy to apply and economical.

Nail cutter
A nail cutter is a professional cutting instrument for shortening artificial fingernails. An indispensable tool for any nail salon. With a good nail cutter you can cut natural nails, nail tips, artificial nails without chipping and breaking.

Rosewood sticks
High quality natural woods for gentle cleaning and pushing back the cuticle. For nail sculpting, manicure and pedicure.

Cellulose role
For cleaning the nails before, during and after the sculpting our cellulose swaps are the perfect tool. The cellulose swabs are lint-free and versatile. These cellulose swabs are also excellent for cleaning brushes

Nail brush
Whether it is for the removal of coarse dirt to the care of soaked cuticle or a gentle peeling. The nail brush is a great all-rounder that is indispensable for the professional nail care. The nail trumps with its hygienic plastic frame. It is important in all cases of nail care that the brush is not used in a dry state. The hands should be slightly softened in soapy water and then treated gently. Even when hands and feet are not involved, the nail brush is always helpful.

Rhinestone Set
The rhinestone ornaments can be easily incorporated into the nail sculpting. Place the ornaments on the tray. Apply finishing gel and place rhinestones with a rosewood stick. Then cure for 2 minutes under a UV curing device. To ensure there are no bumps, you can then apply again the finishing gel and cure for another 2 minutes. Now remove sweat layer.

Nail oil
Through the quality ingredients of our nail oil  brittle, dehydrated nails are cared for chapped cuticles provided with new moisture. By a hot water bath, in which the hands are freed from grease, cuticle remover is first applied and the cuticles pushed back. After the subsequent hand scrub and hand cream the nail oil is applied and massaged with the brush around the nail and around the cuticle. For particularly intensive care nail oil can be applied after each hand washing. The results of the care with this high quality oil are visible very soon.

Sculpting templates
The sculpting templates will help you to conjure up a perfect nail. They are self adhesive and are easy to apply to the nail. In this way you can work wonderfully and shape the nail with gel or acrylic. If minor repairs are needed or a minimum extension is desired, the sculpting templates help you avoid transitions. For you as a beginner sculpting templates are a good resource to learn safely the technique of nail sculpting. With the sculpting templates the nail is worked naturally and is clean at the edges.

Spot Swirl
You have the possibility with a spot swirl to carry out entire nail sculpting. Even when sculpting the sport swirl can be used to create the perfect smile line. You conjure up beautiful swirls, fine lines or apply decorative nail art. To this end it helps you place stickers or rhinestones. You can work accurately and as needed, use the small or large ball.
It is easy to clean with our cleaner and can be used again at any time immediately.

Nail Art mesh
Exceptional nail art idea. With our Nail Art mesh you can easily conjure up a fantastic mesh look on your nails. Even beginners succeed in creating an unusual design. Combine with a suitable color nail gel or apply directly to the builder gel and the nails become an eye catcher.